Flat roof structure kit with concrete ballast for two photovoltaic panels
As low as €107.88
In stock
SKU
KIT2ZV
Kit Structure for mounting two Photovoltaic Solar Panels with concrete ballasts on a flat roof.
Pagamenti 100% sicuri con 
Kit Support Structure with Concrete Ballast Support for Photovoltaics
Suitable for installing solar panels on a flat roof or any flat surface.
The kit for installing a photovoltaic panel on a flat roof includes:
- Cement Block Ballast Support
- Ballast Mats
- Final Clamp for fixing Solar Panel
The installation steps for the Flat Roof Support Kit are as follows:
- Fix the two concrete blocks, equidistant from each other, on the flat roof surface, placing the mats underneath them.
- Gently lay the photovoltaic panel (not included) on the blocks and secure with the four end clamps.
Technical Specifications
| Ballasts | |||||
| SKU | ZV0 | ZV5 | ZV8 | ZV15 | ZV30 |
| Material | (stone grit, cement, and fibre) | ||||
| Weight | 30 Kg | 34 Kg | 40 Kg | 50 Kg | 48 Kg |
| Inclination | 0° | 5° | 8° | 15° | 30° |
| Length | 100 cm | 95 cm | 90 cm | 95 cm | 85 cm |
| H1 - H2 | 12 cm | 9 cm - 17 cm | 8,5 cm - 21 cm | 13 cm - 38 cm | 13 cm - 61.5 cm |
| Mat | |
| SKU | TL098 |
| Material | EPDM |
| Dimensions | 100 cm x 13.5 cm |
| End Clamp | ||
| SKU | TL004.8030 | TL004.8035 |
| Clamp Material | Aluminium extruded unfinished, AL6060-T5 | Aluminium extruded unfinished, AL6060-T5 |
| Screw (included) | TCEI M8X20 Stainless Steel A2 | TCEI M8X20 in A2 Stainless Steel |
| Eccentric Block Material (included) | Raw extruded aluminium AL6060-T5 | Aluminium Raw Extruded AL6060-T5 |
| Hole Diameter (mm) | 8,5 | 8,5 |
| Length (mm) | 80 | 80 |
| Module thickness (mm) | 30-33 | 34-38 |
| Centre Clamp | ||
| SKU | TL006.80.3033 | TL006.80.3438 |
| Clamp Material | Aluminium extruded unfinished, AL6060-T5 | Unfinished extruded aluminium, AL6060-T5 |
| Screw (included) | TCEI M8X20 in Stainless Steel A2 | TCEI M8X20 in A2 Stainless Steel |
| Eccentric Block Material (included) | Raw extruded aluminium AL6060-T5 | Aluminium Raw Extruded AL6060-T5 |
| Hole Diameter (mm) | 8,5 | 8,5 |
| Length (mm) | 80 | 80 |
| Module thickness (mm) | 30-33 | 34-38 |
Write Your Own Review
Technical Specifications
| Ballasts | |||||
| SKU | ZV0 | ZV5 | ZV8 | ZV15 | ZV30 |
| Material | (stone grit, cement, and fibre) | ||||
| Weight | 30 Kg | 34 Kg | 40 Kg | 50 Kg | 48 Kg |
| Inclination | 0° | 5° | 8° | 15° | 30° |
| Length | 100 cm | 95 cm | 90 cm | 95 cm | 85 cm |
| H1 - H2 | 12 cm | 9 cm - 17 cm | 8,5 cm - 21 cm | 13 cm - 38 cm | 13 cm - 61.5 cm |
| Mat | |
| SKU | TL098 |
| Material | EPDM |
| Dimensions | 100 cm x 13.5 cm |
| End Clamp | ||
| SKU | TL004.8030 | TL004.8035 |
| Clamp Material | Aluminium extruded unfinished, AL6060-T5 | Aluminium extruded unfinished, AL6060-T5 |
| Screw (included) | TCEI M8X20 Stainless Steel A2 | TCEI M8X20 in A2 Stainless Steel |
| Eccentric Block Material (included) | Raw extruded aluminium AL6060-T5 | Aluminium Raw Extruded AL6060-T5 |
| Hole Diameter (mm) | 8,5 | 8,5 |
| Length (mm) | 80 | 80 |
| Module thickness (mm) | 30-33 | 34-38 |
| Centre Clamp | ||
| SKU | TL006.80.3033 | TL006.80.3438 |
| Clamp Material | Aluminium extruded unfinished, AL6060-T5 | Unfinished extruded aluminium, AL6060-T5 |
| Screw (included) | TCEI M8X20 in Stainless Steel A2 | TCEI M8X20 in A2 Stainless Steel |
| Eccentric Block Material (included) | Raw extruded aluminium AL6060-T5 | Aluminium Raw Extruded AL6060-T5 |
| Hole Diameter (mm) | 8,5 | 8,5 |
| Length (mm) | 80 | 80 |
| Module thickness (mm) | 30-33 | 34-38 |
The information below is required for social login
Sign In
Create New Account